Levelmount_Machine_Mounts

5 Construction Elastomer-metal combination, compact design, integrated levelling system, 7 sizes in 3 Shore hardnesses Properties • Active and passive supports • Vibration isolation • Shock absorption • Structure-borne sound insulation • Anchor-free installation • Load range 0.1 kN – 110 kN • Natural frequency (stat.) 6 Hz – 20 Hz • Fine-pitch thread Materials • Elastomer body in CR grade with high elasticity, oil-resistant and non-ageing • Outer cap made of steel St W 23, or grey cast iron, Metal surface powder-coated, yellow • Forged pressure plate • Screw ISO 8676 (DIN 961), M5/M10/M12 ISO 4017 (DIN 933), grade 8.8, galvanised Levelling Levelling range max. 5 – 30 mm Remarks Options: • metal parts made of stainless steel • elements with square head bolts Delivery contents Standard with mounting screw, washer and nut, BA type without anchor bolt Variants Standard: LM 5-42 LM Series 0 –4 1–4 1–6 1–11 3–11 3–25 3–33 5–27 5–42 5–55 6–60 6–80 6–66 7–100 7–77 8–250 8–251 Load per element in kN Presses in general Strokes up to 110/min. (max.) 2.0 3.2 4.5 5.0 7.0 10.0 9.0 13.0 20.0 18.0 30.0 35.0 50.0 65.0 100.0 90.0 Eccentric presses and automatic cutting presses strokes up to 300/min. (max.) 1.3 2.4 4.0 6.0 7.0 9.5 13.0 23.0 40.0 70.0 60.0 For higher stroke rates, please contact us Turning machines 2.2 3.0 4.2 5.0 10.0 7.0 12.0 20.0 17.0 30.0 25.0 Milling machines 3.0 2.5 4.0 6.0 4.0 7.0 15.0 10.0 20.0 28.0 23.0 36.0 35.0 Surface grinders 2.2 3.0 4.2 5.0 10.0 7.0 12.0 20.0 17.0 30.0 25.0 Machines in general 0.8 2.2 3.8 4.8 6.5 9.0 12.0 11.0 16.0 30.0 25.0 35.0 40.0 64.0 72.0 100.0 100.0 Static maximum load 1.0 2.6 4.3 6.0 8.8 12.0 20.0 14.0 22.0 40.0 32.0 50.0 55.0 70.0 80.0 110.0 110.0 The load values listed in this table represent reference values that were determined on the basis of good stability and anchor-free installation of machines. The load areas not highlighted in colour in the table are used in individual vibrational machine supports that were designed according to diagram. For elements not listed in the table, refer to page 7. LM Series