Levelmount_Machine_Mounts

13 Pneumatic spring accessory Maintenance and control unit SU-A Maintenance and control unit SU-A Construction Filter-regulator with pressure gauge for displaying the system pressure (inlet pres- sure) and a cut-off cock. Pressure gauges for displaying network pressure and pressure in each regulator circuit. Area of application The maintenance and control unit is used in conjunction with suitable level- ling control valves for semi-active control of pneumatic springs (e.g. type SLM). Particularly for situations with varying load distribution. Mode of operation The network pressure is set to the required inlet pressure by using the filter-regulator. The inlet pressure must be set to a value at which the connected pneumatic spring elements carry the applied load safely. Delivery contents Maintenance and control unit SU-A Part no.: FB61020860 Construction • Mechanical-pneumatic proportional valve • Metal parts made of light alloy • Swivel connectors for hose with 6 mm outer diameter • Inflow rate controlled with throttle valve at entry • Base plate with screw mount (Ø 8 mm) Area of application Pneumatic suspension systems with level control by EFFBE, e.g. for optical and mechanical measuring equipment, measuring tables, mounting plates, test benches, scales, etc. To be used in conjunction with maintenance and control unit SU-A for varying load distribution. Mode of operation Target level is set with adjusting screw on the lever. According to the lever position, any load change leads to supply or discharge of compressed air. Order reference Levelling control valve MPN 01/H Part no.: FB61020991 Levelling control valve MPN 03/H MV Part no.: FB61021518 Circuit diagram (MPN) Circuit diagram (SU-A) Dimensions upon request MPN (mechanical-pneumatic levelling regulation) for standard pneumatic springs 105 255 85 160 Mounting 126 16 27.5 5.5 System 3 System 1 shut-off valve Compressed air supply Pressure supply MPN Pressure regulators, Filter, water separator System 2 Example: MPN 03H Mounting plate Construction • Steel plate • Silver powder-coated finish similar to RAL 9006 Area of application Using the mounting plate ensures that the load footprint covers the entire (projected) surface of the EFFBE LEVELMOUNT SLM element, and is thus centred. This avoids any undesirable internal forces on the pneumatic springs, allowing the design load to be supported in complete safety. Materials Steel St 37 Delivery contents Mounting plate version S (standard) Mounting plate Type Part no. Ø D2 Ø D1 t kg MPL 1 S FB66026616S 75 11 6 0.2 MPL 3 S FB66026617S 105 13 8 0.5 MPL 6 S FB66026618S 130 13 8 0.8 MPL 12 S FB66026619S 175 13 10 1.9 MPL 24 S FB66026620S 250 17 10 3.8 MPL 48 S FB66026621S 340 17 10 7.1 MPL 72 S FB66026622S 380 26 15 13.2 MPL 96 S FB66026623S 470 26 15 20.2 MPL 144 S FB66026624S 550 26 15 27.7 MPL 192 S FB66026625S 610 26 15 34.1 x° ØD1 ØD2 t